 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NPN-Silizium-Fototransistor Silicon NPN Phototransistor SFH 3010 Wesentliche Merkmale * Sehr kleines SMT-Gehause (SCD 80): (LxBxH) 1,7 mm x 0,8 mm x 0,65 mm * Speziell geeignet fur Anwendungen im Bereich von 420 nm bis 1100 nm * groer Empfangswinkel 80 * geeignet fur IR-Reflow-Loten (JEDEC level 4) * Nur gegurtet lieferbar Anwendungen * Miniaturlchtschranken * Sensorik (z.B. Handy) * Messen/Steuern/Regeln" Typ Type SFH 3010 Bestellnummer Ordering Code Q62702-P5555 Features * Very small SMT package (SCD 80): (LxWxH) 1.7 mm x 0.8 mm x 0.65 mm * Especially suitable for applications from 420 nm to 1100 nm * large viewing angle 80 * suitable for IR reflow soldering (JEDEC level 4) * Available only on tape and reel Applications * Miniature photointerrupters * Sensor technology (eg mobile phone) * For control and drive circuits 2003-01-30 1 SFH 3010 Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Kollektor-Emitterspannung Collector-emitter voltage Kollektorstrom Collector current Kollektorspitzenstrom, < 10 s Collector surge current Emitter-Kollektorspannung Emitter-collector voltage Verlustleistung, TA = 25 C Total power dissipation Symbol Symbol Wert Value - 40 ... + 100 15 30 15 75 7 130 585 Einheit Unit C V mA mA V mW K/W Top; Tstg VCE VCE (t < 2 min) IC ICS VEC Ptot Warmewiderstand Sperrschicht - Umgebung bei RthJA Montage auf FR4 Platine, Padgroe je 16 mm2 Thermal resistance junction - ambient mounted on PC-board (FR4), padsize 16 mm2 each 2003-01-30 2 SFH 3010 Kennwerte (TA = 25 C, = 950 nm) Characteristics Bezeichnung Parameter Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax Bestrahlungsempfindliche Flache Radiant sensitive area Abmessungen der Chipflache Dimensions of chip area Halbwinkel Half angle Kapazitat Capacitance VCE = 5 V, f = 1 MHz, E = 0 Dunkelstrom Dark current VCE = 20 V, E = 0 Fotostrom Photocurrent Ee = 0.5 mW/cm2,VCE = 5 V Anstiegszeit/Abfallzeit Rise and fall time IC = 1 mA, VCC = 5 V, RL = 1 k Kollektrr-Emitter-Sattigungsspannung Collector-emitter saturation voltage IC = 10A Ee = 0.5 mW/cm2, = 950 nm Symbol Symbol S max Wert Value 860 420 ... 1100 Einheit Unit nm nm A LxB LxW 0.02 0.38 x 0.38 80 1.3 mm2 mm x mm Grad deg. pF CCE ICEO 2 (50) nA IPCE >25 A tr,tf 7 s VCEsat 140 mV 2003-01-30 3 SFH 3010 Directional Characteristics Srel = f () 40 30 20 10 0 1.0 OHF00614 50 0.8 60 0.6 70 0.4 80 90 0.2 0 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 2003-01-30 4 SFH 3010 Rel. Spectral Sensitivity, Srel = f (), axial direction 100 % OHF00593 Dark Current ICEO = f (VCE), E = (0) CEO 10 nA 1 OHF00383 ICEO = f (TA), VCE = 20 V, E = (0) CEO 10 3 nA OHF00380 Srel 90 80 70 60 50 40 10 2 10 0 10 1 10 -1 30 20 10 0 400 500 600 700 800 900 10 -2 10 0 10 -1 nm 1100 0 10 20 V 30 V CE 0 20 40 60 80 C 100 TA Photocurrent IPCE = f (TA), VCE = 5 V, normalized to 25 C PCE PCE 25 1.6 1.4 1.2 1.0 0.8 0.6 OHF01524 Collector-Emitter Capacitance CCE = f (VCE), f = 1 MHz C CE 3.0 pF 2.5 OHF00592 Total Power Dissipation Ptot = f (TA) Ptot 140 mW 120 100 OHF00613 2.0 80 60 40 20 1.5 1.0 0.4 0.2 0 -25 0.5 0 0 20 40 60 0 25 50 75 TA C 100 0 -2 10 10 -1 10 0 10 1 V 10 2 80 C 100 TA VCE Photocurrent IPCE = f (VCE), Ee = Parameter IPCE 450 A OHF00612 350 300 250 200 1 mW/cm 2 0.5 mW/cm 2 150 100 50 0 0 5 0.25 mW/cm 2 0.1 mW/cm 2 10 15 20 25 V 30 VCE Dark Current 2003-01-30 5 SFH 3010 Mazeichnung Package Outlines 0.8 (0.031) 0.1 (0.004) (0.002) 0.125 (0.005) +0.05(0.001) -0.03 1.7 (0.067) 0.1 (0.004) 0.3 (0.012) Package marking Package marking (0.001) 0.65 (0.026) +0.02(0.002) -0.05 GPLY6089 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Package Colour Epoxy, SmartLED (SCD 80) colourless, light diffused Package marking Collector Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2003-01-30 6 1.3 (0.051) 0.1 (0.004) 7 max 5 |
Price & Availability of SFH3010
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |